Mar 3, 2022 11:37
2 yrs ago
21 viewers *
Italian term
Rulliera
Italian to English
Tech/Engineering
Construction / Civil Engineering
Crane manual
This is from a crane manual. I understand from the picture that it is located at the end of the boom, on the top, where below there is the hook.
Il livellamento manuale della rulliera viene attivato spostando l’apposito selettore presente sul radiocomando (evidenziato in Figura 42, posizione 1) verso destra su MANUALE. In tale condizione vengono ignorati i segnali provenienti dal controllo automatico del livello e vengono attivate le uscite provenienti dal selettore per il comando manuale della rulliera (Figura 42, posizione 2) tramite il quale è possibile comandare la Salita/Discesa della rulliera stessa.
Il livellamento manuale della rulliera viene attivato spostando l’apposito selettore presente sul radiocomando (evidenziato in Figura 42, posizione 1) verso destra su MANUALE. In tale condizione vengono ignorati i segnali provenienti dal controllo automatico del livello e vengono attivate le uscite provenienti dal selettore per il comando manuale della rulliera (Figura 42, posizione 2) tramite il quale è possibile comandare la Salita/Discesa della rulliera stessa.
Proposed translations
(English)
4 | roller conveyor |
Cillie Swart
![]() |
Proposed translations
14 days
roller conveyor
The manual levelling of the roller conveyor is activated by moving the special selector on the radio control.
Reference comments
1 hr
Reference:
Previous questions
https://www.proz.com/kudoz/italian-to-english/tech-engineeri...
https://www.proz.com/kudoz/italian-to-english/mechanics-mech...
https://www.proz.com/kudoz/italian-to-english/mechanics-mech...
Note from asker:
Since this is a manual, I was hoping to avoid a generic term and find something which is an actual crane part. |
Peer comments on this reference comment:
agree |
philgoddard
3 mins
|
agree |
Barbara Carrara
: Searching the glossaries before posting is always a good place where to start.
12 mins
|
agree |
EleoE
1 day 17 hrs
|
2 days 17 hrs
Reference:
boom roller trunnion assembly
Indoor and larger outdoor cranes, have at the end of the boom, highest point, a trunnion, or enclosed idler, roller, or a combination of complicated bearings to support the great weight than can be lifted.
berniesequip...small indoor,,,quote The boom or I-beam is designed to meet all specifications
utilizing a 25% factor of rated load for impact and 15% of rated
load for hoist and trolley weight.
• The pipe mast or column is designed to give maximum strength
and minimum deflection to resist bending, buckling, and crushing
as well as wear by the trunnion roller assembly.
--------------------------------------------------
Note added at 2 days 17 hrs (2022-03-06 04:57:28 GMT)
--------------------------------------------------
ancora https://en.wikipedia.org/wiki/Crane_(machine)#Telescopic,, the end of the boom is also called a sheave, for steel cable, but is rather large. highest point on a construction crane also for STEEl cable, idler roller unit, and or assembly.
Gru a torre Liebherr-710 HC-L 32/64 Litronic per grattacieli Skyscraper crane from wiki https://it.wikipedia.org/wiki/Gru_(macchinario)#/media/File:...
--------------------------------------------------
Note added at 2 days 17 hrs (2022-03-06 05:04:58 GMT)
--------------------------------------------------
Note picture of crane boom tip sheaves https://www.seatrax.com/cranebasics.html
--------------------------------------------------
Note added at 2 days 17 hrs (2022-03-06 05:17:12 GMT)
--------------------------------------------------
in picture jib tip sheave https://www.engineersdaily.com/2016/12/lattice-boom-crawler-...
berniesequip...small indoor,,,quote The boom or I-beam is designed to meet all specifications
utilizing a 25% factor of rated load for impact and 15% of rated
load for hoist and trolley weight.
• The pipe mast or column is designed to give maximum strength
and minimum deflection to resist bending, buckling, and crushing
as well as wear by the trunnion roller assembly.
--------------------------------------------------
Note added at 2 days 17 hrs (2022-03-06 04:57:28 GMT)
--------------------------------------------------
ancora https://en.wikipedia.org/wiki/Crane_(machine)#Telescopic,, the end of the boom is also called a sheave, for steel cable, but is rather large. highest point on a construction crane also for STEEl cable, idler roller unit, and or assembly.
Gru a torre Liebherr-710 HC-L 32/64 Litronic per grattacieli Skyscraper crane from wiki https://it.wikipedia.org/wiki/Gru_(macchinario)#/media/File:...
--------------------------------------------------
Note added at 2 days 17 hrs (2022-03-06 05:04:58 GMT)
--------------------------------------------------
Note picture of crane boom tip sheaves https://www.seatrax.com/cranebasics.html
--------------------------------------------------
Note added at 2 days 17 hrs (2022-03-06 05:17:12 GMT)
--------------------------------------------------
in picture jib tip sheave https://www.engineersdaily.com/2016/12/lattice-boom-crawler-...
Example sentence:
The liftting arm of a crane is the boom, highest point called the tip, which in large construction cranes is heavy duty, contains (ROLLER UNIT) , can be called boom trunnion rolller assembly, just one design.
The end of the boom may have an attachment trunnion, or (rooler unit idler for steel cable), trunnions are also in other parts of the crane.
Discussion