This site uses cookies.
Some of these cookies are essential to the operation of the site,
while others help to improve your experience by providing insights into how the site is being used.
For more information, please see the ProZ.com privacy policy.
This person has a SecurePRO™ card. Because this person is not a ProZ.com Plus subscriber, to view his or her SecurePRO™ card you must be a ProZ.com Business member or Plus subscriber.
Affiliations
This person is not affiliated with any business or Blue Board record at ProZ.com.
Na celý obsah v tejto príručke sa vzťahuje autorské právo. Na prekladanie, nové vydanie, kopírovanie a tiež ukladanie tejto príručky v zariadeniach na spracovanie dát je potrebný výslovný súhlas spoločnosti EMH.
Všetky obchodné značky, ktoré sú v tejto príručke uvádzané sú majetkom spoločnosti EMH Elektrizitätszähler GmbH & Co KG, alebo príslušných držiteľov označení.
EMH Elektrizitätszähler GmbH & Co KG je držiteľom certifikátu podľa normy DIN ISO 9001:2000 a neustále vyvíja úsilie na zlepšovanie svojich produktov.
Obsah tejto príručky a technické požiadavky sa môžu doplňovať, meniť alebo rušiť bez predbežného oznámenia.
Popis technických podmienok produktu uvádzaný v tejto príručke netvorí súčasť zmluvy.
V prípade otázok alebo podnetov nás kontaktujte na adrese:
EMH Elektrizitätszähler
GmbH & Co KG
Südring 5
D - 19243 Wittenburg
tel.: +49(0)3 88 52 – 645-0
fax.: +49(0)3 88 52 – 645-29
E-mail: [email protected]
internet: www.emh-meter.de
Obsah
1. Úvod 5
1.1 Bezpečnostné pokyny 5
1.2 Upevnenie a inštalácia 6
1.2.1 Upevnenie elektromera na podložku 6
1.2.2 Zapojenie elektromera 6
1.2.3 Svorkovnice 7
1.2.3.1 Elektromer riadený transformátorom 7
1.2.3.2 60 A elektromer pre priame zapojenie 7
1.2.3.3 100 A elektromer pre priame zapojenie 8
2 Hlavné funkcie 9
3 Normy a predpisy 10
4 Teleso, ovládanie a prvky na displeji 11
5 Technický popis 12
5.1 Technické parametre 12
5.2 Funkčná schéma zapojenia 13
5.3 Tarifné spínacie hodiny 14
5.4 Dátové rozhrania 15
5.4.1 Optické dátové rozhranie D0 15
5.4.2 Elektrické dátové rozhranie RS485 15
5.4.3 Elektrické dátové rozhranie CLO (CS) 17
5.5 Vstupy 18
5.6 Výstupy 18
5.7 Kryt 19
5.7.1 Základná doska 19
5.7.2 Kryt elektromera zaisťovaný plombou 19
5.7.3 Kryt svorkovnice zaisťovaný plombou 19
6 Obsluha elektromera 20
6.1 Prevádzkové režimy 20
6.1.1 Parametrický stav (PAR-Status) 20
6.1.2 Testovací režim 20
6.1.3 Štandardný prevádzkový režim 20
6.1.3.1 Štandardné zobrazovanie 20
6.1.3.2 Zobrazenie chybového stavu 20
6.2 Displej 21
6.2.1 Zisťovanie chyby zariadenia 22
6.2.2 Zisťovanie manipulácie 24
6.3 Kontrola displeja 26
6.4 Štruktúra pomocného zoznamu operácií a funkcií 27
7 Špeciálne funkcie 29
7.1 Funkcie v stave nulového napätia 29
7.2 Zaznamenávanie elektrickej energie 29
7.3 Zaznamenávanie okamžitých hodnôt 29
7.4 Meranie maximálneho odberu 29
8 Indikácia hodnôt elektromera 30
8.1 Komunikačné programové prostriedky 30
8.2 Tabuľka číslo 1 pre štandardný prevádzkový režim 31
8.3 Tabuľka číslo 2 pre testovací režim 32
8.4 Tabuľka číslo 2 32
Index 33
Zoznam obrázkov
Obrázok číslo 1: Rozmery elektromera 6
Obrázok číslo 2: Schéma zapojenia 6
Obrázok číslo 3: Svorkovnica pre elektromer riadený transformátorom 7
Obrázok číslo 4: Svorkovnica 60 A elektromera pre priame zapojenie 7
Obrázok číslo 5: Svorkovnica 100 A elektromera pre priame zapojenie 8
Obrázok číslo 6: Teleso, ovládanie a prvky na displeji 11
Obrázok číslo 7: Funkčná schéma zapojenia 13
Obrázok číslo 8: Usporiadanie systému – dvojkáblová zbernica RS485 16
Obrázok číslo 9: Kryt elektromera 19
Obrázok číslo 10: Svorkovnica s vývodom pre zisťovanie manipulácie 19
Obrázok číslo 11: Usporiadanie displeja 21
Obrázok číslo 12: Pracovný plán 26
Obrázok číslo 13: EHM-COMBI-MASTER 2000 30
1. Úvod
V tejto príručke sú popísané všetky varianty koncepcie elektromera ITZ. Nezabudnite, že elektromery môžu mať z hľadiska, napríklad konfigurácie, rozhraní, vstupov a výstupov atď.
rozdielnu konštrukciu. Preto je možné, že budú popísané také charakteristiky počítadiel, ktoré sa nebudú v každom detaili vzťahovať na elektromer (-y), ktorý používate.
1.1 Bezpečnostné pokyny
Tieto elektromery sú určené výhradne na meranie elektrickej energie a nesmú sa používať mimo rozsahu špecifikovaných technických parametrov (pozri typový štítok).
Pri inštalácii alebo pri výmene tohto elektromera nesmie byť v tých vodičoch, ktoré sú do prístroja zapojené, žiadne elektrické napätie. Pre tento účel sa môžu používať len určené skrutkové svorkovnice. Dotýkanie sa súčastí pod napätím je životu nebezpečné. Preto treba príslušnú záložnú poistku vybrať a uložiť tak, aby ju nemohli nedovoleným spôsobom používať iné osoby.
Pred otvorením elektromera treba bezpodmienečne skratovať sekundárny okruh vedúci do prúdového transformátora. Vysoké napätie na tomto prúdovom transformátore je životu nebezpečné a môže poškodiť aj samotný transformátor.
Pri nesprávnom inštalovaní elektromera môžu vstupy S0 viesť k sieťovému napätiu.
Upozornenie: Nebezpečenstvo:
Treba dodržiavať platné miestne normy, smernice, nariadenia a bezpečnostné predpisy. Inštaláciu elektromerov môžu vykonávať len odborníci s primeranou kvalifikáciou pre túto činnosť.
1.2 Upevnenie a inštalácia
1.2.1 Upevnenie elektromera
Elektromery konštrukčnej rady ITZ sú určené pre upevnenie na stenu podľa normy DIN 43 857-2.
Obrázok číslo 1: Rozmery elektromera
1.2.2 Zapojenie elektromera
Pri pripájaní elektromera sa bezpodmienečne musí postupovať podľa schémy zapojenia, ktorá je nalepená na kryte svorkovnice a tiež je priložená k dodacej dokumentácii.
Príklad:
Obrázok číslo 2: Schéma zapojenia
- 3x230/400 V; 5/(60) A
- 1 riadiaci vstup (ES)
- 1 výstup pre Opto-MOSFET (HR)
- elektrické rozhranie RS485
Poznámka: Elektromery na priame pripojenie treba zaistiť proti skratu poistkou 63A prípadne 100A, elektromery riadené transformátorom musia byť v napäťovom obvode istené poistkou < 10A.
Svorkovnice
Vnútorný priemer
Zapojenie – prierez (s puzdrom konektora)
Prúdové a napäťové svorkovnice 4,6 mm približne 6 mm2
Prídavné svorkovnice 3,0 mm približne 2,5 mm2
Obrázok číslo 3: Svorkovnica pre elektromer riadený transformátorom
1.2.3.2 60 A elektromer pre priame zapojenie
Svorkovnice
Vnútorný priemer
Zapojenie – prierez (s puzdrom konektora)
Prúdové svorkovnice 6,5 mm približne 10 mm2
Napäťové a prídavné svorkovnice 3,2 mm približne 2,5 mm2
Obrázok číslo 4: Svorkovnica 60 A elektromera pre priame zapojenie
1.2.3.3 100 A elektromer pre priame zapojenie
Svorkovnice
Vnútorný priemer
Zapojenie – prierez (s puzdrom konektora)
Prúdové svorkovnice 9,5 mm približne 25 mm2
Napäťové svorkovnice (4,5 x 4,5 mm) približne 2,5 mm2
Prídavné svorkovnice 3,2 mm približne 2,5 mm2
Obrázok číslo 5: Svorkovnica 100 A elektromera pre priame zapojenie
2. Hlavné funkcie
- elektromery pre priame zapojenie alebo riadené transformátorom sú určené na meranie aktívnej elektrickej energie;
- zaznamenávanie elektrickej energie môže mať nasledovné parametre nastavené vo výrobe:
- meranie napätia + s nereverznou západkou
- meranie napätia + a napätia –
- absolútne meranie napätia
- až do 4 tarifných počítadiel +1 beztarifné počítadlo pre každý register s 10 predbežnými hodnotami;
- 1 počítadlo pre maximálnu spotrebu, 15 predbežných hodnôt;
- testovacia LED pre skúšku elektromera;
- Rozhrania dát:
- optické rozhranie dát D0;
- elektrické rozhranie dát CL0 alebo RS485.
- Hodiny ukazujúce reálny čas s funkciou kalendára;
- zisťovanie manipulácie s elektromerom
3. Normy a predpisy
IEC 62052-11 Prístroje na meranie spotreby elektriny (striedavý prúd) – Všeobecné požiadavky, skúšky a podmienky skúšok - časť číslo 11: Meracie počítadlá (IEC 62052-11:2003);
IEC 62053-21 Meracie počítadlá spotreby elektrického prúdu (striedavý prúd) – Podrobné požiadavky – časť číslo 21: Statické elektromery pre aktívnu elektrickú energiu (triedy 1 a 2) (IEC 62053-21:2003);
Nemecká verzia EN 62053-21:2003
DIN EN 61038 Časové spínače pre tarify a miestne riadenie (IEC 61038:1990, novela); Nemecká verzia EN 61038:1992.
DIN EN 61000 Elektromagnetická zlučiteľnosť (EMC).
DIN EN 60529 Stupne ochrany zabezpečovanej krytmi (kód IP) (IEC 60529:1989 + A1:1999); Nemecká verzia EN 60529:1991 + A1:2000c.
DIN EN 62056-61 Meranie spotreby elektriny – výmena dát pre údaj meracieho prístroja, tarifu a miestne riadenie – časť číslo 61: Systém identifikácie objektu OBIS. (IEC 62056-61:2002, anglický text.
VDEW-Lastenheft 2.1 Elektronische Lastgangzähler (elektromer na meranie profilu elektronickej záťaže)
4. Teleso, ovládanie a prvky na displeji
Číslo Popis Funkcia
1 Kryt elektromera ––
2 Testovacia LED Skúšanie elektromera
3 LC displej Displej na zobrazovanie hodnôt a stavových informácií
4 Tlačidlo na nastavovanie parametrov Stlačením tohto tlačidla sa elektromer prepne do režimu nastavovania parametrov (je pod krytom elektromera)
5 Tlačidlo pre mechanické vyvolanie Vyvolanie obsahu displeja na LC displeji
6 Upevňovacia skrutka Skrutka na upevnenie krytu svorkovnice.
7 Kryt svorkovnice Kryt pre svorkovnicu
8 Tlačidlo pre optické vyvolanie Vyvolanie obsahu displeja na LC displeji
9 Optické rozhranie dát D0 Určené pre komunikáciu medzi elektromerom a príslušným snímacím zariadením.
10 Tlačidlo mechanického resetovania Vykonávanie určitých funkcie, ako napríklad nastavovanie hodín a podobne.
11 Zisťovanie manipulácie Zisťovanie otvorenia krytu svorkovnice a zisťovanie magnetických polí (pod krytom elektromera)
12 Upevňovacia skrutka Upevňuje kryt prístroja zakrývajúci svorkovnice
5. Technický popis
5.1 Technické parametre
Napätie 4 káblový elektromer 3x230/400V, 3x220/380V, 3x58/100V, 3x63/110V, 3x115/200V, 3x127/220V, 3x132/230V
Napätie 5(60)A, 5(85)A, 5(100)A, 5(100)A, 10(60)A, 10(65)A, 10(100)A, 5 II1A, 1(6)A
Kmitočet 50 Hz, 60 Hz
Presnosť cl.2 podľa IEC 62053-21, variant cl.1
Typy elektromerov aktívna elektrická energia W+ (s nereverznou západkou), variant: W+/W- a absolútna hodnota W
Konštanty elektromera LED (imp./kWh)
Výstup (imp./kWh) 500 – 40000 (v závislosti od typu elektromera)
250 – 20000 (v závislosti od typu elektromera)
Počítadlá elektrickej energie maximálny počet 4 tarifové počítadlo + 1 beztarifné počítadlo, každé s 10 predbežnými hodnotami
Maximálne počítadlo maximálny počet
merací cyklus 1 maximálne počítadlo (nepretržite zapnuté 24 hod.), 15 predbežných hodnôt
10 alebo 15 minút (môže mať nastavené parametre)
Hodiny ukazujúce reálny čas Presnosť
synchronizácia
zapojená rezervná batéria/kondenzátor v rozsahu ± 5 ppm
cez rozhrania dát, riadiaci vstup alebo riadkový kmitočet
> 10 rokov/> 7 dní
Riadiace vstupy 50 alebo vstup impulzov
napätie systému 1 kus
max. 2 kusy
Retenčná doba dát bez napätia v EEPROM, najmenej 20 rokov
Displej typ
veľkosť číslic
prídavný displej LCD
8 x 4 mm (rozsah hodnoty)
stavové informácie o výpadku fázy, poradí fázy, tarife, zapnutí elektromera, manipulácii a zapnutí rezervy RTC cez vyrovnávaciu batériu (dodatočná výbava)
Prevádzka mechanické tlačidlá
optický senzor pre vyvolanie zobrazenia a resetovanie (uzatváracie)
pre vyvolanie zobrazenia
Rozhrania dát optické rozhranie dát
elektrické rozhranie dát
dátový protokol
maximálna rýchlosť prenosu optické rozhranie dát D0
RS485 alebo CL0
IEC 62056-21
300, 1200, 2400, 4800, 9600 Baud, režim C
Výstupy maximálny počet 3 (50, Opto-MOSFET, relé alebo vysokozáťažové relé)
Napájanie spínací zdroj napájania
vyrovnávacia doba elektrickej siete 3 fázy z meraného napätia
> 200 ms
Odber z napájacej siete na jednu fázu (základný elektromer) tok napätia
tok prúdu < 1,3 VA/0,8 W
< 0,03 VA
Charakteristické vlastnosti EMC izolačná rezistencia
odolnosť na polia s vysokým kmitočtom izolácia: 4 kV, stried. prúd, 50 Hz, 1 min.
EMC: 4 kV, impulz 1,2/50μs, 2 Ω
ISO: 5 kV, impulz 1,2/50μs, 500 Ω (meranie tokov a vstupov), 6kV, impulz 1,2/50μs, 500 Ω (výstupy)
30 V/m (pod záťažou)
Teplotný rozsah prevádzkový/medzný rozsah -250C ... +600C/-400C ...+700C
-400C ... +700C
Relatívna vlhkosť 90% pri 400C, nekondenzujúca
Kryt rozmery
trieda ochrany
stupeň ochrany krytu
stupeň ochrany svorkovnice
materiál krytu
protipožiarne vlastnosti
hmotnosť približne 178x328x61 mm (š x v x h)
2
IP 51
IP 31
polykarbonát zosilený skleneným vláknom, recyklovateľný
zabraňuje horeniu (bez halogénu)
po 60 A približne 1,35 kg, po 100 A približne 1,6 kg
Ďalšie funkcie zisťovanie manipulácie zaznamenávanie počtu pokusov o manipuláciu a začiatok a koniec posledných 10 pokusov o manipuláciu s elektromerom
5.2 Funkčná schéma zapojenia
Obrázok číslo 7: Funkčná schéma zapojenia
5.3 Tarifné spínacie hodiny
Tarifné spínacie hodiny pracujú podľa hodín ukazujúcich reálny čas (RTC) a dajú sa nastaviť pomocou rozhrania D0. Presnosť chodu hodín sa pohybuje v rozmedzí +/- 5 ppm.
Tarifné spínacie hodiny udávajú čas, kedy sa má zapnúť prepínanie tarify. Pre toto prepínanie taríf sa môžu nastavovať parametre, pričom je aktívna vždy jedna tarifa. Externé ovládanie taríf je taktiež možné. Pritom sa automaticky vypínajú interné tarifné spínacie hodiny. Elektromer ITZ má k dispozícii osobitné denné spínacie hodiny pre dni týždňa [pracovné dni] a dni sviatky.
Nasledovné typy dní sú podporované:
- pondelok – piatok
- sobota
- nedeľa
- sviatky [dni pracovného pokoja]
Nabíjanie hodín ukazujúcich reálny čas sa vykonáva prostredníctvom kondenzátora SuperCap – pri rezerve chodu > 7 dní. Pri úplne vybitom kondenzátore SuperCap činí doba nabíjania od privedenia fázových napätí približne 22 min (90 % elektrického napätia).
Keď sa rezerva chodu hodín vyčerpá, tak sa hodiny ukazujúce reálny čas nastavia po obnove elektrického napätia naspäť na časový okamih výpadku elektrického napätia. Segmenty prístroja LCD T1, T2, T3 a T4 sa budú zobrazovať dovtedy, kým sa hodiny budú nastavovať.
Nastavovanie dátumu a času
Dátum a čas sa dá nastavovať pomocou softvéru EMH-COM alebo EMH-COMBI-MASTER 2000 buď prostredníctvom optického alebo elektrického rozhrania. V Nemecku sa na základe požiadaviek PTB môže vykonať nastavovanie cez elektrické rozhranie len raz po skončení parametrického stavu, alebo po obnovení napätia.
Synchronizácia hodín ukazujúcich reálny čas sa vykonáva pomocou:
a) interných hodín;
b) synchronizačného vstupu, alebo
c) riadkového kmitočtu.
Vyrovnávanie hodín ukazujúcich reálny čas sa vykonáva pomocou:
a) batérie, alebo
b) kondenzátora, alebo
c) kondenzátora a vyrovnávacej batérie, alebo
d) batérie a vyrovnávacej batérie.
Batéria zabezpečuje rezervu chodu na viac ako 10 rokov, kondenzátor na viac ako 7 dní. Pri úplne vybitom kondenzátore doba nabíjania trvá približne 20 minút po zapnutí fázového napätia (90% napätie).
Keď sa vyčerpá rezerva chodu, potom sa na displeji zobrazí príslušný symbol (viď odsek číslo 21). Po obnovení napätia sa hodiny ukazujúce reálny čas nastavia na čas, kedy vznikol výpadok prúdu. Okrem toho sa elektrická energia zaznamená v pevnom počítadle (v závislosti od konfigurácie 1.8.0, 1.8.1, 1.8.2, 1.8.3 alebo 1.8.4).
Keď sa dobíja batéria alebo kondenzátor, ich funkciu prevezme vyrovnávacia batéria. Táto vyrovnávacia batéria tiež umožňuje, aby bol displej neustále v prevádzke aj v podmienkach bez napätia a tiež odčítavanie elektromera cez optické rozhranie dát D0.
5.4 Dátové rozhrania
Odčítanie dát zabezpečuje optické rozhranie D0, alebo elektrické rozhranie RS-
485, príp. CL0 podľa IEC 62056-21. Rozhranie D0 má pritom vyššiu prioritu.
5.4.1 Optické dátové rozhranie D0
Rozhranie D0 je vyhotovené podľa predpisov IEC 62056-21. Môžu sa nastaviť nasledovné prenosové rýchlosti: režim C s maximálnou rýchlosťou 300, 1200, 2400, 4800 alebo 9600 Baudov.
5.4.2 Elektrické dátové rozhranie RS485
Elektrické rozhranie, ktoré je od elektromera oddelené galvanicky, sa nachádza na prídavných svorkách pod zaplombovateľným krytom svoriek (viď schému pripojenia).
Elektrické rozhranie RS-485 je symetrické, dvojvodičové rozhranie a je vyhotovené podľa predpisov TIA/EIA-485/ITU-T V.11. Do modemu elektromera s rozhraním RS 485 sa môže zapojiť až 32 elektromerov. Elektromer sa môže špecificky určiť a vyvolať. Vzdialenosť medzi čítacím prístrojom a elektromerom nesmie prekročiť 1000 m.
Funkcie
Počet zapojených elektromerov maximálne 32
Maximálna dĺžka kábla maximálne 1000 m
Rýchlosť prenosu dát 300 ... 9600 Baud
Signál podľa TIA/EIA-485/ITU-T V.11 logický „1! -0,3 V až -6V logický „0! +0,3V až +6V
Zbernica RS485
Zbernica RS485 môže obsluhovať až 32 prístrojov. Obyčajne musí byť v zbernicovom systéme ukončený prvý a posledný prístroj pomocou koncového odporu medzi káblom „A“ a „B“, aby sa eliminovali odrazy vodivosti.
Štruktúra zbernice
Obrázok číslo 8: Usporiadanie systému – dvojkáblová zbernica RS485
Detail:
Poznámka:
Koncový odpor sa môže nainštalovať len pri prvom a poslednom elektromeri
5.4.3 Elektrické dátové rozhranie CLO (CS)
Elektrické rozhranie CL0, ktoré je od elektromera oddelené galvanicky, sa tu nachádza na prídavných svorkách pod zaplombovateľným krytom svoriek (viď obrázok číslo 3 na strane číslo 8).
Rozhranie CL0 bolo vyhotovené podľa predpisov normy DIN 66 348, časť 1. Ide o tzv. pasívne dvojvodičové rozhranie, to znamená, že nedisponuje vlastným zdrojom elektrického napätia. Dáta sa prenášajú ako značka/medzera pri menovitom prúde 20mA. Z tohto dôvodu sa tiež nazýva ako prúdové rozhranie 20 mA.
Pokles elektrického napätia série komutovaných vysielačov a prijímačov v elektromeri je približne 4 V. Toto umožňuje zapojiť do série max. štyri výstupy elektromera a prevádzkovať ich jedným modemom.
Elektromery sú špecificky adresované a vyvolávané.
Rozhranie CL0 je vhodné na prenos dát až do vzdialenosti jedného kilometra.
Hlavné funkcie
Počet zapojených elektromerov maximálne 32
Maximálna dĺžka kábla maximálne 1000 m
Rýchlosť prenosu dát 300 ... 9600 Baud
Elektrické funkcie
Signál jednotka nula
Maximálna dĺžka kábla ≥ 110 mA ≤ 2,5 mA
Rýchlosť prenosu dát ≥ 9 mA ≤ 3 mA
Prípustný pokles elektrického napätia
Vysielač maximálne 4 V
Prijímač maximálne 4 V
Maximálne hodnoty
Prúd 24 mA (skrat)
Napätie 27 V (prerušený obvod)
5.5 Vstupy
Elektromer ITZ môže mať nasledovné vstupy:
- 2 riadiace vstupy s nízkym alebo systémovým napätím (potenciálne voľný), pričom jedno z nich je vstup S0 (potenciálne obsadený), maximálne 27 V jednosmerného prúdu, 27 mA (aktívny);
- 1 aktívny vstup impulzov (potenciálne obsadený, tiež v stave bez napätia) pre zaznamenávanie energie (napríklad plynomer).
5.6 Výstupy
Elektromer ITZ môže mať maximálne 3 výstupy:
- maximálne 3 výstupy ako S0 podľa DIN 43 864, alebo
- maximálne 2 relé (zabezpečujú kontakt), pričom jedno z nich musí vyť pre vysoké zaťaženie (zabezpečuje kontakt), alebo
- maximálne 3 výstupy ako Opto-MOSFET (rozpojenie alebo spojenie).
Technické parametre
Výstup S0 Doba impulzu 20-500 ms (25-1 Hz) v 20 ms odstupňovaní;
elektrické impulzy 100-10000 Imp/kWh;
maximálne 27 V jednosmerného prúdu, 27 mA, (pasívny)
Relé maximálne 250 V striedavý/jednosmerný prúd, 100 mA
Relé pre vysoké zaťaženie maximálne 250 V striedavý/jednosmerný prúd, 10 mA
Opto-MOSFET maximálne 250 V striedavý/jednosmerný prúd, 100 mA
5.7 Teleso elektromera
5.7.1 Základná doska
Je vyrobená zo sivého polykarbonátu, s horným závesným okom a ako aj s dvomi dolnými závesnými okami.
5.7.2 Plombovateľný kryt elektromera
Je vyrobený z číreho polykarbonátu. Priestor okna je priehľadný a ostatná časť má erodovanú štruktúru. Kryt elektromeru je v hornej časti zavesený na základnú dosku a v dolnej časti je k nemu priskrutkovaný dvomi zaplombovateľnými skrutkami.
Obrázok číslo 9: Kryt elektromera
5.7.3 Kryt svorkovnice zaisťovaný plombou
Kryt svorkovnice je vyrobený zo šedého polykarbónu. Pomocou plombovateľných skrutiek je priskrutkovaný k svorkovnici. Každý pokus o otvorenie krytu sa pomocou tohto kolíka zaznamenáva. Na strane svorkovnice je nalepená schéma zapojenia.
Obrázok číslo 10: Svorkovnica s vývodom pre zisťovanie manipulácie
6. Obsluha elektromera
6.1 Prevádzkové režimy
6.1.1 Parametrický stav (PAR-Status)
Parametrický stav sa používa na konfigurovanie elektromera vo výrobe. Na aktiváciu tohoto režimu je potrebné stlačiť tlačidlo PAR-Status. Toto tlačidlo sa nachádza na hlavnom riadiacom paneli elektromerov a chránený je plombou.
6.1.2 Testovací režim
V režime testovania je rozlíšenie elektrickej energie 100 krát vyššie ako rozlíšenie v štandardnom prevádzkovom režime. Toto sa tiež vzťahuje na tabuľku odpočtu hodnôt.
Testovací režim sa môže tiež vyvolať prostredníctvom povelu zápisu 1.58.T(N).
„N“ = 1 znamená aktácia, „N“ = 0 znamená vypnutie. „T“ znamená počet taríf, ktoré sú aktivované týmto povelom.
Blikajúci symbol hviezdičky a výkričník súčasne signalizuje na displeji zapnutie testovacieho režimu (viď stranu č. 21). Po 24 hodinách neprerušenej prevádzky sa testovací režim automaticky vypne.
6.1.3 Štandardný prevádzkový režim
Keď sa elektromer nachádza v normálnej prevádzke, potom je vždy v štandardnom prevádzkovom režime.
6.1.3.1 Štandardné zobrazovanie
Po nainštalovaní elektromera a chode pomocou testov displeja bude elektromer v štandardnom zobrazovaní. Ak je elektromer vo viactarifnej úprave, hodnota elektrickej energie a označenie aktívnej tarify sa zobrazuje na displeji.
U dvojtarifných elektromeroch so statickým displejom sa hodnota elektrickej energie pre vysokú tarifu zobrazuje v okienku pre hodnotu a hodnota elektrickej energie pre nízku tarifu sa zobrazuje v okienku pre kód OBIS. Týmto číslice hodnoty vysokej tarify klesajú z 8 na 7. Displej sa z každého stavu vracia späť do štandardného zobrazovania za predpokladu, že displej nebol prevádzkovaný v nakonfigurovanej dobe opozdenia (5 až 30 minút).
6.1.3.2 Zobrazenie chybového stavu
Počas prevádzky elektromera sa vykonáva nepretržitá kontrola zapisovača dát, kódu a tiež kontrolného súčtu. Ak sa počas kontroly zistí chyba, potom sa na displeji zobratí kód chyby.
6.2 Displej
Elektromer ITZ je vybavený displejom z tekutých kryštálov (LCD).
3.2. Ovládacie prvky
Obrázok číslo 11: Usporiadanie displeja
Číslo Popis
1 Zobrazenie fáz, identifikátor poradia fáz
2 Zobrazenie aktívnej tarify
3 Zobrazovanie pri nesprávnom smere elektrickej energie, alebo zaregistrovaní zápornej aktívnej elektrickej energie
4 Zobrazovanie pri štarte elektromera, keď elektromer zaznamenáva kladnú aktívnu elektrickú energiu
5 Zobrazovanie, keď elektromer zaznamenáva pokus o manipulovanie
6 Zobrazovanie hodnoty a jednotky
7 Zobrazovanie, keď je vyčerpaná rezerva chodu hodín
8 Zobrazovanie pri zapnutom prenose údajov
9 Zobrazovanie pri aktívnom testovacom režime
10 Zobrazovanie kódu OBIS alebo nízkej tarify
6.2.1 Zisťovanie chyby zariadenia
Elektromer ITZ ponúka nasledovné možnosti pri zisťovaní chyby zariadenia, ktoré sa zobrazujú pomocou segmentov LCD „L1“, „L2“ a „L3“.
1. Zobrazovanie fázy (U1, U2, U3)
Zobrazovanie symbolov L1, L2 a L3 signalizuje, že napätie je privádzané jednotlivo do všetkých fáz. Zistená porucha fázy sa zobrazuje pomocou symbolu.
2. Identifikátor poradia fázy
Táto funkcia je aktívna len vtedy, keď sa privádzajú všetky tri napätia. Pri nesprávnom poradí fáz budú blikať všetky tri symboly.
3. Zobrazovanie smeru elektrickej energie
Zaznamenaný smer elektrickej energie sa zobrazuje pomocou symbolov P+ a P-. P+ = elektromer zaznamenáva kladnú elektrickú energiu;
P- = elektromer zaznamenáva zápornú elektrickú energiu.
4. Zobrazovanie pri štarte elektromera alebo počítadlo aktívnej elektrickej energie
Keď Wsúčet je väčší ako prahová hodnota pri štarte a príslušné počítadlo zaznamenáva elektrickú energiu, objaví sa šípka príslušného smeru elektrickej energie (P+ alebo P- v závislosti od konštrukcie elektromera).
5. Zobrazovanie pri nesprávnom smere elektrickej energie
Táto funkcia si vyžaduje privádzanie napätia vo všetkých fázach a tiež správne poradie fáz. Pri nesprávnom smere elektrickej energie budú blikať symboly „L1“, „L2“ a „L3“ a tiež P+/P-.
6. Zobrazovanie pri zápornom smere elektrickej energie (Wsúčet < 0)
a) Jednosmerný elektromer.
Pri zápornom smere elektrickej energie sa nezaznamenáva žiadna elektrická energia. LED je stále rozsvietená (prevádzka bez záťaže), P- tiež svieti a P+ nie je zobrazené;
b) Obojsmerný elektromer.
Pri zápornom smere elektrickej energie sa zobrazí P-.
c) IWI – Elektromer pre absolútne hodnoty
Pri zápornom smere elektrickej energie sa zobrazí P+ a P-, pretože smer elektrickej energie je záporný a počítadlo elektrickej energie pre W+ je aktívne.
7. Zobrazenie odchyľujúcich sa smerov elektrickej energie vo fázach
a) Jednosmerný/obojsmerný elektromer.
Ak sa smer elektrickej energie aspoň jednej fázy odchyľuje od súčtu smeru elektrickej energie, potom okrem šípky smeru elektrickej energie súčtu fáz sa rozsvieti aj šípka opačného smeru elektrickej energie. Okrem toho sa rozsvieti symbol príslušnej fázy.
Príklady:
Prípad Zobrazenie
Wsúčet > 0, W2 < 0
P+ je zaznamenané P+ je stabilné, svieti L2 a P-
Wsúčet < 0, W3 > 0
W- je zaznamenané P+ je stabilné, svieti L2 a P-
Wsúčet > 0, W1 a W3 < 0
W+ je zaznamenané P+ je stabilné, svieti L1, L3 a P-
b) IWI – Elektromer pre absolútne hodnoty.
Ak je aspoň jedna fáza záporná, potom okrem šípky smeru elektrickej energie P+ sa zobrazí aj šípka smeru elektrickej energie P-.
Prípad Zobrazenie
Wsúčet < 0, W+ je zaznamenaná
W- je zaznamenané P+ a P- je stabilné
8. Zistenie poruchy fázy
Elektromer ITZ zaznamenáva v nasledovných zápisoch dátum a čas výpadku napätia a tiež dátum a čas obnovenia napätia v každej fáze:
W = Elektromer prípadu (00-99, 10 predbežných hodnôt)
Príklad:
C.51.1*02 (10502031250000) = druhý výpadok napätia vo fáze L2 o 12:50 hod. dňa 3.2.2005.
Príslušný posledný časový údaj pre obnovu napätia C.52.X*Nový() je zistený vtedy, keď sa vyskytne výpadok napätia (zápis v C.51.X(*Nový +1), ináč je neprijateľný starý časový údaj.
Okrem toho elektromer ITZ zaznamenáva v nasledovnom zápise počet výpadkov napätia pre každú fázu:
Počet výpadkov napätia
L1 L2 L3
C.7.1 C.7.2 C.7.3
6.2.2 Zisťovanie manipulácie
Z dôvodu ochrany proti pokusom o manipuláciu má elektromer ITZ nainštalovaný systém zisťovania manipulácie. Používajú sa dva odlišné typy zisťovania:
a) monitorovanie krytu svorkovnice;
b) monitorovanie magnetického poľa.
Všeobecné informácie
Ak sa elektromer ITZ nachádza v parametrickom stave, potom monitorovanie manipulácie „nie je spojené“, čo znamená, že nie sú zaznamenané žiadne pokusy o manipulovanie. Avšak, keď sa stlačí tlačidlo obsluhy, alebo keď sa aplikuje vonkajšie magnetické pole, môže sa zobrazenie manipulácie preveriť ("symbol ruky“).
Monitorovanie manipulácie sa zapína tridsať minúť po vypnutí parametrických stavov.
Prípad manipulácie
a) Monitorovanie krytu svorkovnice.
Ak je elektromer ITZ v normálnej prevádzke, potom sa každý pokus o otvorenie krytu svorkovnice zaznamená spolu s dátumom a časom. Ak je do elektromera vložená vyrovnávacia batéria, zaznamenanie sa môže tiež vykonať v stave bez napätia. Symbol "ruky" signalizuje na displeji manipuláciu s krytom svorkovnice. Okrem toho môže byť cez výstup spustený aj alarm.
Elektromer ITZ registruje počty otvárania krytu svorkovnice na počítadle C.51.7(). Pri každom ďalšom pokuse o otvorenie tohto krytu sa hodnota zvyšuje o 1. Počítadlo má 8 číslic od 00000000 po 99999999.
Pre každé fakturačné obdobie sa v počítadlách C.51.5() a C.51.6() ukladajú pokusy o manipuláciu. V týchto počítadlách je uložených posledných 10 pokusov o manipuláciu. V počítadle C.51.5() je uložený začiatok posledného pokusu o manipuláciu za príslušné fakturačné obdobie spolu s informáciou o dátume a čase. V počítadle C.51.6() sa ukladá koniec pokusu o manipuláciu spolu s dátumom a časom.
b) Monitorovanie magnetického poľa
Ak je elektromer v normálnej prevádzke, potom sa každý pokus o manipuláciu s elektromerom s magnetickým poľom zaznamenáva spolu s dátumom a časom. Pokus o manipuláciu tohto typu signalizuje na displeji symbol „ruky“.
Elektromer ITZ registruje počty týchto pokusov o manipuláciu na počítadle C.52.7(). Pri každom ďalšom pokuse o manipulovanie sa hodnota zvyšuje o 1. Počítadlo má 8 číslic od 00000000 po 99999999.
Pre každé fakturačné obdobie sa v registroch C.52.5() a C.52.6()ukladajú pokusy o manipuláciu. V týchto registroch je uložených posledných 10 pokusov o manipuláciu. V počítadle C.52.5() je uložený začiatok posledného pokusu o manipuláciu za príslušné fakturačné obdobie spolu s informáciou o dátume a čase. V počítadle C.52.6() sa ukladá koniec pokusu o manipuláciu spolu s dátumom a časom.
Okrem toho môže byť cez výstup spustený aj alarm.
Resetovanie počítadla počtu manipulovaní a tvorba predbežných hodnôt
a) Resetovanie pri snímaní cez optické rozhranie D0:
Pomocou snímania cez optické rozhranie D0 sa zruší na displeji symbol „ruky“, alebo sa zruší aktivovaný alarm.
Poznámka: Nie je vytvorená žiadna predbežná hodnota.
b) Resetovanie pomocou diaľkového snímania cez elektrické rozhrania.
Resetovanie cez elektrické rozhranie sa robí spolu s resetovaním cez optické rozhranie.
c) Automatické resetovanie
Na konci fakturačného obdobia sa vykoná automatické resetovanie počítadiel s predbežnými hodnotami C.51.5*00() a C.52.5*00() a tiež C.51.6*00() a C.52.6*00().
Po resetovaní zostáva na displeji symbol „ruky“ alebo aktivovaný alarm.
d) Manuálne resetovanie
Počítadlo sa manuálne resetuje pomocou resetovacieho tlačidla. Toto je vyhodnotené ako udalosť a ukladá sa do počítadla C.51.8. Potom sa táto udalosť prenáša do počítadla s predbežnou hodnotou s dodatočnou identifikáciou ako "&". Následne sa na displeji zruší symbol "ruky" alebo sa vypne alarm.
6.3 Kontrola displeja
Kontrola displeja sa v prvom rade vykonáva prostredníctvom vyvolávacieho tlačidla. Niektoré funkcie, ako napríklad vykonávanie manuálneho resetovania, nastavovanie parametrov, času a podobne, si vyžaduje použitie resetovacieho tlačidla, ktoré môže byť zaistené plombou.
Pri stlačení vyvolávacieho tlačidla sa rozlišuje medzi nasledovnými úkonmi:
a) = krátke stlačenie tlačidla (< 2 s.)
b) = dlhé stlačenie tlačidla (2 s. < t < 5 s.), a
c) ´= dlhšie stlačenie tlačidla (> 5 s.).
Pomocný zoznam operácií a funkcií displeja na elektromeri ITZ je rozdelený na rôzne stupne zobrazovania. Pri stlačení tlačidla podľa je možné prepínať z jedného stupňa zobrazenia do iného. Každý stupeň zobrazenia má podstupne. Pri stlačení tlačidla podľa je možné prepínať z jedného stupňa zobrazenia do podstupňa a potom z jedného podstupňa do iného podstupňa. Stlačením tlačidla podľa je možné prepnúť z každého stupňa späť do stupňa zobrazenia číslo 1.
Obrázok číslo 12: Pracovný plán
6.4 Štruktúra pomocného zoznamu operácií a funkcií
Stupeň zobrazenia Počítadlo Popis
Zapnutý „Počiatočný stav“
1. Rolovanie v zozname
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8 1.8.0
1.8.1
1.8.2
1.8.3
1.8.4
2.8.0
0.9.1
0.9.2 aktívna elektrická energia, import, bez tarify
aktívna elektrická energia, import, tarifa 1 (ak je aktívna)
aktívna elektrická energia, import, tarifa 2 (ak je aktívna)
aktívna elektrická energia, import, tarifa 3 (ak je aktívna)
aktívna elektrická energia, import, tarifa 4 (ak je aktívna)
aktívna elektrická energia, export, bez tarify (ak IWI výlučne konfigurované s počítadlom W+)
čas
dátum
2. Skúška zobrazenia
3. Počítadlá elektrickej energie
3.1
3.2
3.3
3.4
3.5
3.6
C.69.9() aktívna elektrická energia, import, bez tarify
aktívna elektrická energia, import, tarifa 1 (ak je aktívna)
aktívna elektrická energia, import, tarifa 2 (ak je aktívna)
aktívna elektrická energia, import, tarifa 3 (ak je aktívna)
aktívna elektrická energia, import, tarifa 4 (ak je aktívna)
aktívna elektrická energia, export, bez tarify (ak IWI výlučne konfigurované s počítadlom W+)
Hodnota elektrickej energie pre dodatočné typy (ak sú konfigurované)
Kód OBIS pre dodatočné typy (ak sú konfigurované)
4. Okamžité hodnoty
4.1
4.2
4.3
4.4
4.5
4.6
4.7 1.25(00.000)
31.25(00.00)
51.25(00.00)
71.25(00.00)
32.25(000.1)
52.25(000.1)
72.25(000.1) Okamžitá hodnota Wspolu
Okamžitá hodnota 1
Okamžitá hodnota I1
Okamžitá hodnota I3
Okamžitá hodnota U1
Okamžitá hodnota U2
Okamžitá hodnota U3
5. Čas a dátum
5.1
5.2
5.3 0.9.1(0072447)
0.9.2(0040303)
0.9.5(3) Čas
Dátum
Deň v týždni
6. Informácie o tarife
6.1 0.2.2(04030302 Číslo programu spínacích hodín
7. Počítadle predbežných hodnôt elektrickej energie
7.1
7.2
7.3
1.4.0(00000.0)
1.6.1(00000.0)
1.6.1*00(00000.0) Resetovanie počítadla
00. Resetovanie počítadla s predbežnou hodnotou
Predbežná hodnota aktívnej elektrickej energie, import, bez tarify (ak je aktivované)
Predbežná hodnota aktívnej elektrickej energie, import, tarifa 1 (ak je aktivovaná)
Predbežná hodnota aktívnej elektrickej energie, import, tarifa 2 (ak je aktivovaná)
Predbežná hodnota aktívnej elektrickej energie, import, tarifa 3 (ak je aktivovaná)
Predbežná hodnota aktívnej elektrickej energie, import, tarifa 4 (ak je aktivovaná)
Priemerná hodnota prúdu (ak je konfigurovaná maximálna hodnota)
Maximálna hodnota (ak je konfigurovaná)
15 maximálnych predbežných hodnôt (ak sú konfigurované)
Stupeň zobrazenia Počítadlo Popis
8. Čísla zariadenia
8.1
8.2
8.3
8.4
...
8.9 C.1.0()
0.0.0()
0.0.1()
0.0.2()
0.0.9() Poradové číslo
Adresa zariadenia
Identifikačné číslo 1
Identifikačné číslo 2
Identifikačné číslo 9
9. Zapisovače údajov
9.1
9.2
9.3
9.4
9.5
9.6
9.7 F.F(00000000)
0.2.0(00000301)
0.2.1*01(04030302)
0.2.1*50(04030302)
C.90.0(000027B2)
C.90.1(000027B2)
C.90.2(000027B2) Zapisovanie chýb
Identifikácia mikroprogramového vybavenia
Parameter číslo 1
Parameter číslo 50
Kontrolný súčet PAR
Kontrolný súčet SET
Kontrolný súčet ROM
10. Zisťovanie manipulácie
10.1
Dátum/čas poslednej manipulácie s krytom svorkovnice (začiat.)
Dátum/čas poslednej manipulácie s krytom svorkovnice (koniec)
00.Predbežná hodnota manipulácie s krytom svorkovnice (zač.)
00.Predbežná hodnota manipulácie s krytom svorkovnice (kon.)
Celkový počet manipulácií s krytom svorkovnice
Dátum/čas poslednej manipulácie (začiatok)
Dátum/čas poslednej manipulácie (koniec)
00.Predbežná hodnota manipulácie s magnetom (začiatok)
00.Predbežná hodnota manipulácie s magnetom (koniec)
Celkový počet manipulácií s magnetom
11. Údaje o elektromeri
11.1
11.2
11.3 C.5.0(00A00090)
Podmienky vnútornej operácie
Kód masky pre štandardný výstup/zobrazenie
Kód masky pre testovací výstup/zobrazenie
12. Monitorovanie výpadku napätia
12.1
12.2
12.3
12.4
12.5
12.6
12.7
12.8
12.9 C.7.1(00000000)
C.7.2(00100023)
C.7.3(00100023)
C.51.1*00(1041004142500)
C.51.2*00(1041004142500)
C.51.3*00(1041004142500)
C.52.1*00(1041004142500)
C.52.2*00(1041004142500)
C.52.3*00(1041004142500) Počet výpadkov fázy L1
Počet výpadkov fázy L2
Počet výpadkov fázy L3
00.predbežná hodnota pre výpadok fázy L1
00.predbežná hodnota pre výpadok fázy L2
00.predbežná hodnota pre výpadok fázy L3
00.predbežná hodnota pre výpadok fázy L1
00.predbežná hodnota pre výpadok fázy L2
00.predbežná hodnota pre výpadok fázy L3
7. Špeciálne funkcie
7.1 Funkcie v stave nulového napätia
V stave nulového napätia môže elektromer ITZ napájať vyrovnávacia batéria. Podporované sú nasledovné funkcie:
- riadenie displeja
- snímanie elektromera cez optické dátové rozhranie D0
- zisťovanie manipulovania
- okamžité vyrovnávanie zaregistrovaných externých impulzov (napríklad plynomer, vodomer a podobne).
7.2 Zaznamenávanie elektrickej energie
Elektromer ITZ sa môže konfigurovať pre nasledovné typy zaznamenávanie elektrickej energie:
a) Aabsolútne meranie W-
W+ a W- sa zaznamenávajú v počítadle pre W+. Absolútne meranie sa robí po jednotlivých fázach: IWcelkomI = IW1I + IW2I + IW3I.
b) Meranie W+ a W-
W+ a W- sa zaznamenávajú v dvoch samostatných počítadlách:
Wcelkom = W1 + W2 + W3
Wcelkom > 0 = Import
Wcelkom < 0 = Export
c) Meranie W+ s nereverznou západkou
Wcelkom = W1 + W2 + W3
Wcelkom > 0 = elektrická energia je zaznamenaná
Wcelkom < 0 = zapnutá nereverzná západka a elektrická energia sa nezaznamenáva
7.3 Zaznamenávanie okamžitých hodnôt
Elektromer ITZ môže zaznamenávať elektrickú energiu P, napätie U a prúd I a zobrazovať s nasledovnými číslami (celé čísla/desatinné čísla (jednotka)):
- U = 3,1 (V)
- I = 3,2 (A) (u elektromerov s priamym zapojením)
- I = 1,3 (A) (u elektromerov riadených transformátorom)
- IPI = 2,2 (kW) (u elektromerov s priamym zapojením)
- IPI = 1,3 (kW) (u elektromerov riadených transformátorom)
7.4 Meranie maximálneho odberu
Elektromer ITZ môže merať maximálny odber elektrického prúdu. Maximálny odber prúdu sa vykonáva buď synchrónne s hodinami nepretržite 24 hodín, alebo je zapojený do tarify. Cyklus merania môže mať nastavené parameter na 10 minút alebo 15 minút.
8 Indikácia hodnôt elektromera
8.1 Komunikačné programové prostriedky
EMH-COm alebo EMH-COMBI-MASTER 2000 sú štandardné komunikačné programové prostriedky pre elektromer ITZ .
Obrázok číslo 13: EHM-COMBI-MASTER 2000
S týmto programom môžete vykonávať nasledovné úkony:
- čítať zoznamy výstupov;
- nastavovať hodiny;
- vykonávať kumuláciu;
- čítať identifikačné čísla a zapisovať do elektromera;
- čítať rýchlosť prenosu dát v Baud;
- čítať rýchlosť prenosu dát externého rozhrania v Baud a zapisovať do elektromera;
- resetovať počítadlo pokusov o manipuláciu;
- odosielať povely zápisu a snímania do elektromera;
- konfigurovať tarify (dodatočná výbava).
8.2 Tabuľka číslo 1 pre štandardný prevádzkový režim
Počítadlo Popis
F.F Závažná chyba počítadla
0.0.0 Adresa zariadenia
0.0.1 Identifikačné číslo 1
0.0.2 Identifikačné číslo 2
0.9.1 Synchronizačná doba
0.9.2 Dátum
0.9.5 Deň v týždni
1.6.1 Maximálny odber aktívnej elektriny
1.8.0 Aktívna elektrická energia, import, bez tarify
1.8.1 Aktívna elektrická energia, import, tarifa 1
1.8.2 Aktívna elektrická energia, import, tarifa 2 (ak je aktivovaná)
1.8.3 Aktívna elektrická energia, import, tarifa 3 (ak je aktivovaná)
1.8.4 Aktívna elektrická energia, import, tarifa 4 (ak je aktivovaná)
2.8.0 Aktívna elektrická energia, import, bez tarify (ak IWI nie je výlučne konfigurované počítadlom W+)
C.51.5 Dátum/čas posledného manipulovania s krytom svorkovnice (začiatok)
C.51.5*00 00. predbežná hodnota manipulácie s krytom svorkovnice (začiatok)
C.51.5*99 01. predbežná hodnota manipulácie s krytom svorkovnice (začiatok)
C.51.5*98 02. predbežná hodnota manipulácie s krytom svorkovnice (začiatok)
...
C.51.5*91 08. predbežná hodnota manipulácie s krytom svorkovnice (začiatok)
C.51.5*90 09. predbežná hodnota manipulácie s krytom svorkovnice (začiatok)
C.51.6 Dátum/čas posledného manipulovania s krytom svorkovnice (koniec)
C.51.6*00 00. predbežná hodnota manipulácie s krytom svorkovnice (koniec)
C.51.6*99 01. predbežná hodnota manipulácie s krytom svorkovnice (koniec)
C.51.6*98 02. predbežná hodnota manipulácie s krytom svorkovnice (koniec)
...
C.51.6*91 08. predbežná hodnota manipulácie s krytom svorkovnice (koniec)
C.51.6*90 09. predbežná hodnota manipulácie s krytom svorkovnice (koniec)
C.51.7 Celkový počet manipulácií s krytom svorkovnice
1.25 Okamžitá hodnota Pcelkom
31.25 Okamžitá hodnota I 1
51.25 Okamžitá hodnota I 1
71.25 Okamžitá hodnota I 3
32.25 Okamžitá hodnota U1
52.25 Okamžitá hodnota U2
72.25 Okamžitá hodnota U3
8.3 Tabuľka číslo 1 pre testovací režim
Počítadlo Popis
F.F Závažná chyba počítadla
0.0.0 Adresa zariadenia
0.0.1 Identifikačné číslo 1
0.0.2 Identifikačné číslo 2
0.2.0 Identifikácia mikroprocesorového vybavenia
0.2.1*01 Parameter číslo 1
0.2.1.*50 Parameter číslo 50
0.2.2 Číslo programu spínacích hodín
0.9.1 Synchronizačná doba
0.9.2 Dátum
0.9.5 Deň v týždni
1.6.1 Maximálna aktívna elektrická energia
1.8.0 Aktívna elektrická energia, import, bez tarify
1.8.1 Aktívna elektrická energia, import, tarifa 1
1.8.2 Aktívna elektrická energia, import, tarifa 2 (ak je aktivovaná)
1.8.3 Aktívna elektrická energia, import, tarifa 3 (ak je aktivovaná)
1.8.4 Aktívna elektrická energia, import, tarifa 4 (ak je aktivovaná)
2.8.0 Aktívna elektrická energia, import, bez tarify (ak IWI nie je výlučne konfigurované počítadlom W+)
C.1.0 Poradové číslo
8.3 Tabuľka číslo 2
Počítadlo Popis
F.F Závažná chyba počítadla
0.2.0 Identifikácia mikroprocesorového vybavenia
0.9.1 Synchronizačná doba
0.9.2 Dátum
0.9.5 Deň v týždni
C.1.0 Poradové číslo
C.7.X Počet výpadkov fázy (X=1, 2 alebo 3)
C.51.X*VV() Predbežné hodnoty pre výpadky napätia (X=1, 2 alebo 3)
C.52.X*VV() Predbežné hodnoty pre obnovu napätia (X=1, 2 alebo 3)
INDEX
C
čísla zariadenia 28
D
dátové rozhrania 12
E
elektrické dátové rozhranie CL0 3, 9, 17
elektrické dátové rozhranie RS485 3, 15
F
funkčná schéma zapojenia 3, 4, 13
H
hmotnosť 12
hodiny ukazujúce reálny čas 12, 14
I
izolačná rezistencia 12
identifikátor poradia fázy 21
informácie o tarife 27
K
komunikačné programové prostriedky 30
kontrola displeja 3, 26, 29
konštanty elektromera 12
kryt elektromera 3, 11, 19
kryt svorkovnice 3, 6, 11, 15, 17, 19, 24
28, 31
L
LCD displej 11
M
monitorovanie magnetického poľa 24
monitorovanie krytu svorkovnice 24
monitorovanie výpadku napätia 28
maximálny odber 3, 29
N
napätia 9
nízke alebo systémové napätie 18
O
okamžité hodnoty 3, 29
optické dátové rozhranie D0 3, 9, 11, 15
P
presnosť 12, 14
prúdy 9
- elektrické dátové rozhranie CL0 3, 9, 17
- elektrické dátové rozhranie RS485 3, 15
- optické dátové rozhranie D0 3, 9, 11, 15
počítadlá elektrickej energie 12, 27
predbežné hodnoty počítadla
elektrickej energie 27
parametrický stav 14, 24
R
retenčná doba dát 12
riadiaci vstup 6, 12, 18
rolovací zoznam 27
rozsah teploty 12
S
skúška displeja 20
smer elektrickej energie 21, 22, 23
spotreba elektrickej energie 12
skrutka s plombou 19
štandardný displej 20
spínací zdroj napájania 12
spínacie hodiny tarify 14
svorkovnice 3, 7
T
teleso 12
- základná doska 3, 19
- trieda ochrany 12
- stupeň ochrany 12
- rozmery 4, 6, 12
- protipožiarne vlastnosti 12
- materiál 12
- kryt elektromera 3, 11, 19
- kryt svorkovnice 3, 6, 11, 15, 17, 19, 24
typy meraní 12
tlačidlo mechanického vyvolávania 11
tlačidlo mechanického resetovania 11
28, 31
tlačidlo optického vyvolania 11
testovací režim 3, 20
tlačidlo pre parametre 11
U
údaje o elektromeri 28
upevnenie elektromera 3, 6
V
vstupy 12, 18
- riadiaci vstup 6, 12, 18
- vstup impulzov 12, 18
- nízke alebo systémové napätie 18
vyrovnávacia doba elektrickej siete 12
výstupy 5, 12, 17, 18
Z
zapojenie elektromera 3, 6
zaznamenávanie elektrickej energie 29
zobrazenie chybového stavu 3, 20
As a Freelancer, I deal with translation of both technical and general documents, covering the fields like mechanical engineering, electronics, PC hardware/software, power engineering, agriculture, finance, accounting, user manuals, etc. In my work, I use the following software: Word, Excel, AdobeReader, PhotoShop, CorelDaw; CAT: Trados, SDLX 2005, SDL Trados Studio 2011.
I am capable to delivering the jobs to meet the customers deadlines located anywhere in the world.
My pricing mostly meets customers’ visions or I can fix as competitive prices as possible.
This user has earned KudoZ points by helping other translators with PRO-level terms. Click point total(s) to see term translations provided.