Glossary entry (derived from question below)
French term or phrase:
Entraxe ouvert
English translation:
Centre-to-centre dimension - Open
Added to glossary by
Jonathan Whiteley
Dec 31, 2013 02:30
10 yrs ago
3 viewers *
French term
Entraxe ouvert
French to English
Tech/Engineering
Agriculture
Hydraulic equipment for agricultural applications
Column header in a table, the next column header entry is Entraxe fermé (mm).
The document is a catalog of hydraulic equipment. Most of my work is German to English but I am interested in improving my French and would appreciate your help.
The document is a catalog of hydraulic equipment. Most of my work is German to English but I am interested in improving my French and would appreciate your help.
Proposed translations
(English)
5 | Centre-to-centre dimension - Open | kashew |
3 +1 | Open Centre Distance | patrickfor |
3 +1 | intercentre distance, open | B D Finch |
Proposed translations
14 hrs
Selected
Centre-to-centre dimension - Open
*
--------------------------------------------------
Note added at 14 heures (2013-12-31 17:22:17 GMT)
--------------------------------------------------
The range consists of eight components, with which seven standard pull handle shapes can be put together with any centre-to-centre dimension required.
hewi.be
L'assortiment se compose de huit composants avec lesquels on peut assembler sept formes de poignées usuelles avec n'importe quelle mesure d'entraxe.
hewi.be
--------------------------------------------------
Note added at 14 heures (2013-12-31 17:22:17 GMT)
--------------------------------------------------
The range consists of eight components, with which seven standard pull handle shapes can be put together with any centre-to-centre dimension required.
hewi.be
L'assortiment se compose de huit composants avec lesquels on peut assembler sept formes de poignées usuelles avec n'importe quelle mesure d'entraxe.
hewi.be
4 KudoZ points awarded for this answer.
+1
5 hrs
Open Centre Distance
Open Centre Distance (OCD) Entraxe ouvert
Closed Centre Distance (CCD) entraxe fermé
trouvé dans vocabulaire technique agricole
Closed Centre Distance (CCD) entraxe fermé
trouvé dans vocabulaire technique agricole
Peer comment(s):
agree |
Didier Fourcot
: Par exemple pour des systèmes à voir variable ou vérins d'écartement d'accessoires
1 hr
|
neutral |
writeaway
: please post references that back your proposed translation(s) /just add it under your answer. There's unlimited space. The Dbox becomes too cluttered. And it's clearer to see the references here. Just references, discussion not really necessary.
3 hrs
|
I'll put a new discussion item in a minute. more room there to get into detail
-> Done! Happy with the explanation? :-)
|
+1
7 hrs
intercentre distance, open
Afraid I haven't time to look for references. Intercentre or inter-centre, but usually not hyphenated nowadays.
--------------------------------------------------
Note added at 20 hrs (2013-12-31 23:12:49 GMT)
--------------------------------------------------
"Intercentre distance" is a fairly common term meaning distance between centres of whatever the objects are whose separation is being measured. Used in mechanics, particle physics and bog standard construction and so why not agricultural machinery too?
As the comma indicates, I read the question as though the intercentre distance between whatever and whatever else might vary according to whether something or other is open or closed.
www.google.co.uk/patents/US3812909
"The realization of wheel mechanisms with the intercentre distance adjustable .... "
www.reproduction-online.org/content/68/1/21.full.pdf
sample wells with an intercentre distance of about 8 mm were cut into one end of a gel strip
www.st-andrews.ac.uk › ... › Research
"... an intrinsic paramagnetic or a second spin-label is present the dipole interaction between the two centres can be used to measure the inter-centre distance."
www.tdx.cat/bitstream/10803/5366/2/nga1de1.pdf.txt
The setup consists on a milling machine connected to a computer [36]. ...... of 5 μm radius, recessed by one micron and displaying 100 μm intercentre distance.
www.sumobrain.com/patents/wipo/Spinnerette/WO1994028210.htm...
8 Dec 1994 - ... AND METHOD FOR CLEANING SPINNING MACHINE ..... in different packing arrangements, the intercentre distance will differ from one hole ...
--------------------------------------------------
Note added at 20 hrs (2013-12-31 23:12:49 GMT)
--------------------------------------------------
"Intercentre distance" is a fairly common term meaning distance between centres of whatever the objects are whose separation is being measured. Used in mechanics, particle physics and bog standard construction and so why not agricultural machinery too?
As the comma indicates, I read the question as though the intercentre distance between whatever and whatever else might vary according to whether something or other is open or closed.
www.google.co.uk/patents/US3812909
"The realization of wheel mechanisms with the intercentre distance adjustable .... "
www.reproduction-online.org/content/68/1/21.full.pdf
sample wells with an intercentre distance of about 8 mm were cut into one end of a gel strip
www.st-andrews.ac.uk › ... › Research
"... an intrinsic paramagnetic or a second spin-label is present the dipole interaction between the two centres can be used to measure the inter-centre distance."
www.tdx.cat/bitstream/10803/5366/2/nga1de1.pdf.txt
The setup consists on a milling machine connected to a computer [36]. ...... of 5 μm radius, recessed by one micron and displaying 100 μm intercentre distance.
www.sumobrain.com/patents/wipo/Spinnerette/WO1994028210.htm...
8 Dec 1994 - ... AND METHOD FOR CLEANING SPINNING MACHINE ..... in different packing arrangements, the intercentre distance will differ from one hole ...
Note from asker:
Belated thanks for your good help |
Peer comment(s):
agree |
Daryo
12 mins
|
Thanks Daryo
|
|
neutral |
writeaway
: in all fairness, when you have time, a few refs would be helpful
1 hr
|
OK, see above.
|
|
neutral |
patrickfor
: what's an intercentre? Can't find it even on google... technical word?
6 hrs
|
It's an adjective, not a noun.
|
Discussion
(1) I have found a document pertaining to the "Hydraulic equipment for agricultural applications" as suggested by jfwhiteley
(2) I have found in this document the exact french terms quoted by jf.
(3) I have found the same doc in english and displayed here a screenshot of both documents so that everybody can make up their mind.
(4) I have found the meaning of the acronyms used (OCD/CCD)
I believe my translation is correct, I know there might be others as it is often the case.
We are here to offer choices, and ideas, so here is mine, and I stick to it.
Happy new year!
The key her for me was to find some reference to entraxe ouvert/fermé in the "Agriculture / Hydraulic equipment for agricultural applications" field.
The first document displayed one of these equipments with a clear reference to entaxe ouvert/fermé. So I was sure that was in the proper context. I also understood the meaning (the "entraxe" is the distance between the axis on the tractor and the (rotation) axis on the equipment attached to the tractor. Open was max before linkage is done, Close is when the link is in operation (the equipment is attached to the tractor and is ready to be used)
Next step was simply to find an equivalent brochure in english to see how they called it, and I found the acronyms OCD/CCD).
(see picture in link)
http://imageshack.com/a/img46/5383/fxd5.jpg
So I guessed O was for Open and C was for Closed.
The last bit was to undertand what CD meant. Linguee is a good tool for that.
I found "Centre" Distance and that made sense as such, as I could see using Linguee that "Centre Distance" was often referenced as "entraxe".
I found it a pdf talking Agriculture equipment.
http://www.publi-interactif.fr/Demo/claas/files/assets/downl...
There iI found one reference and with another google search I found this document
http://btob.hydrokit.com/hydrokit/hyartic2.nsf/($RefHydrokitByGrp)/49DB9FB6A6D2CA77C125703B0062E8EE?OpenDocument&Lang=
in french
-> looking into "informations technique if found what I wanted and understood what it was.
-> I looked for the english equivalent (technical Informations) and it said OCD/CCD
-> it didn't take a tocket scientist to guess O was for open an C was for closed...
-> So what was CD then????
Another Google seach with "entraxe ouvert open CD" took me to linguee page
http://www.linguee.fr/francais-anglais/traduction/entraxe tr...
... This time I was sure it was fine....