Oct 7, 2022 12:24
1 yr ago
25 viewers *
Russian term
время схлопывания воронки
Russian to English
Tech/Engineering
Petroleum Eng/Sci
Сверхтяжелые жидкости для гидроразрыва пласта
Параметр в таблице параметров жидкости для гидроразрыва пласта. Время схлопывания воронки 23 с, время полной сшивки 45 с.
Proposed translations
(English)
3 +1 | cavity collapse time | mk_lab |
Proposed translations
+1
2 hrs
Selected
cavity collapse time
Modeling of Hydrodynamic Cavitation ...
https://pubs.acs.org › doi
The rationale behind this approximation was that the cavity collapse time scales are usually quite small, and considering the typical mean .
--------------------------------------------------
Note added at 3 hrs (2022-10-07 16:24:15 GMT)
--------------------------------------------------
Propagation of a plane-strain hydraulic fracture with a fluid lag,,,
https://www.sciencedirect.com/science/article/pii/S002076830...
Since a fluid cannot sustain infinite suction, a cavity devoid of the fracturing fluid has to be naturally present near the fracture advancing edge. In the case of an impermeable medium, this cavity is filled with the vapors of the fracturing fluid under approximately constant vapor pressure.
https://pubs.acs.org › doi
The rationale behind this approximation was that the cavity collapse time scales are usually quite small, and considering the typical mean .
--------------------------------------------------
Note added at 3 hrs (2022-10-07 16:24:15 GMT)
--------------------------------------------------
Propagation of a plane-strain hydraulic fracture with a fluid lag,,,
https://www.sciencedirect.com/science/article/pii/S002076830...
Since a fluid cannot sustain infinite suction, a cavity devoid of the fracturing fluid has to be naturally present near the fracture advancing edge. In the case of an impermeable medium, this cavity is filled with the vapors of the fracturing fluid under approximately constant vapor pressure.
Note from asker:
Thank you! |
4 KudoZ points awarded for this answer.
Comment: "Большое спасибо!"
Something went wrong...