Glossary entry (derived from question below)
Russian term or phrase:
законтурное торпедирование
English translation:
contour blasting
Added to glossary by
David Gamlitsky
Nov 22, 2019 15:10
4 yrs ago
Russian term
законтурное торпедирование
Russian to English
Tech/Engineering
Other
Добыча полезных ископаемых
Защитная пачка – порода до выбросоопасного слоя.
Можно идти на шпурах 5 метров без законтурного торпедирования
Подход и вскрытие/ пересечение выборосоопасного слоя
Можно идти на шпурах 5 метров без законтурного торпедирования
Подход и вскрытие/ пересечение выборосоопасного слоя
Proposed translations
(English)
2 | contour blasting | Frank Szmulowicz, Ph. D. |
Proposed translations
9 mins
Selected
contour blasting
Proposition.
--------------------------------------------------
Note added at 21 mins (2019-11-22 15:32:04 GMT)
--------------------------------------------------
Contour blasting is also called controlled blasting as its main purpose is to minimize the damage to the rock (overbreak) beyond the boundary of the designed contour of the excavation.
https://link.springer.com/chapter/10.1007/978-981-10-1989-0_...
cccc
The choice of a reasonable excavation sequence and contour blasting method is one of the key techniques for the construction of underground powerhouses.
https://www.sciencedirect.com/science/article/abs/pii/S08867...
Option:
contour borehole torpedoing
For the restoration of the water yield from the non-pressurized aquifers, and for the increasing of the productivity of the low-yield boreholes, they use the explosive torpedoes, which are manufactured of the detonating cord within the waterproof sheath (see the "Torpedoing of the boreholes" article).
During the 1879, the French scientist Mesen has proposed as the means for the explosion the cord with the core of the grained guncotton, which was the prototype for the modern detonating cord. During the end of the 19th century, at the productive petroleum fields within Russia, there have been conducted the blasting works within the boreholes (the torpedoing), with the purpose of the increasing of the petroleum recovery from the layers.
http://mining-enc.com/e/explosive-technology/
--------------------------------------------------
Note added at 21 mins (2019-11-22 15:32:04 GMT)
--------------------------------------------------
Contour blasting is also called controlled blasting as its main purpose is to minimize the damage to the rock (overbreak) beyond the boundary of the designed contour of the excavation.
https://link.springer.com/chapter/10.1007/978-981-10-1989-0_...
cccc
The choice of a reasonable excavation sequence and contour blasting method is one of the key techniques for the construction of underground powerhouses.
https://www.sciencedirect.com/science/article/abs/pii/S08867...
Option:
contour borehole torpedoing
For the restoration of the water yield from the non-pressurized aquifers, and for the increasing of the productivity of the low-yield boreholes, they use the explosive torpedoes, which are manufactured of the detonating cord within the waterproof sheath (see the "Torpedoing of the boreholes" article).
During the 1879, the French scientist Mesen has proposed as the means for the explosion the cord with the core of the grained guncotton, which was the prototype for the modern detonating cord. During the end of the 19th century, at the productive petroleum fields within Russia, there have been conducted the blasting works within the boreholes (the torpedoing), with the purpose of the increasing of the petroleum recovery from the layers.
http://mining-enc.com/e/explosive-technology/
4 KudoZ points awarded for this answer.
Discussion