Glossary entry (derived from question below)
German term or phrase:
(xx mm) tief liegen
English translation:
(xx mm) below the surface
Added to glossary by
David Williams
Jun 15, 2010 13:13
14 yrs ago
German term
tief liegen
German to English
Tech/Engineering
Engineering (general)
Context:
Senkschraube M 5x8 nach DIN 963 muß mit dem Kopf mindestens 0,3 mm tief liegen!
This seems a very basic question, but am I right in assuming that this means that the head has to be recessed by 0.3 mm instead of flush with the surface?
(Obviously, this has nothing to do with poetry & literature, cf. http://www.proz.com/kudoz/3135781 )
Senkschraube M 5x8 nach DIN 963 muß mit dem Kopf mindestens 0,3 mm tief liegen!
This seems a very basic question, but am I right in assuming that this means that the head has to be recessed by 0.3 mm instead of flush with the surface?
(Obviously, this has nothing to do with poetry & literature, cf. http://www.proz.com/kudoz/3135781 )
Proposed translations
(English)
3 +1 | below the surface |
Michael McWilliam
![]() |
3 +1 | countersunk screw at a depth of ..... |
Wendy Streitparth
![]() |
Proposed translations
+1
1 hr
Selected
below the surface
"0.3 mm below the surface"
--------------------------------------------------
Note added at 1 day13 hrs (2010-06-17 02:42:15 GMT)
--------------------------------------------------
Actually it says, " Countersunk screw in accordance with DIN 963, with head set at a minimum of .3 mm below the surface.
--------------------------------------------------
Note added at 1 day13 hrs (2010-06-17 02:57:23 GMT)
--------------------------------------------------
Note that the term "mindestens" means "minimum" in this context.
--------------------------------------------------
Note added at 1 day13 hrs (2010-06-17 02:42:15 GMT)
--------------------------------------------------
Actually it says, " Countersunk screw in accordance with DIN 963, with head set at a minimum of .3 mm below the surface.
--------------------------------------------------
Note added at 1 day13 hrs (2010-06-17 02:57:23 GMT)
--------------------------------------------------
Note that the term "mindestens" means "minimum" in this context.
4 KudoZ points awarded for this answer.
Comment: "Thanks!"
+1
38 mins
countersunk screw at a depth of .....
in other words, yes.
Note from asker:
The question is, which part of the screw has to be at the specified depth? Saying that a screw is at a depth of seems rather vague, but if the head of the screw needs to be a certain depth below the surface level, then the screw is recessed, isn't it? |
Discussion