Glossary entry (derived from question below)
English term or phrase:
Weldge tangent
Russian translation:
метод касательной Уелджа
Added to glossary by
mk_lab
Jul 4, 2003 17:56
21 yrs ago
English term
Weldge tangent
English to Russian
Tech/Engineering
Physics
oil and gas reservoirs
Second application of the Welge tangent: the value of the average saturation is obtained from the intersection of the tangent with fw =1.
Proposed translations
(Russian)
3 +4 | метод (касательной) Вилджа | mk_lab |
4 +1 | Тангенциальный метод/ Метод определения /вычисления нефтеотдачи при закачке газа или воды | Vera Fluhr (X) |
4 | дополнительные соображения: | Vera Fluhr (X) |
Change log
Jul 3, 2005 17:44: mk_lab changed "Field (specific)" from "(none)" to "Physics"
Proposed translations
+4
27 mins
Selected
метод (касательной) Вилджа
.
--------------------------------------------------
Note added at 2003-07-04 18:42:40 (GMT)
--------------------------------------------------
Очччнь специфичный термин, скорее всего, местного употребления.
It was just a guess
--------------------------------------------------
Note added at 2003-07-04 18:42:40 (GMT)
--------------------------------------------------
Очччнь специфичный термин, скорее всего, местного употребления.
It was just a guess
4 KudoZ points awarded for this answer.
Comment: "Graded automatically based on peer agreement. KudoZ."
+1
10 hrs
Тангенциальный метод/ Метод определения /вычисления нефтеотдачи при закачке газа или воды
Перевод всей фразы:
Второе приложение тангенциального метода Уэлджа: среднее значение водонасыщенности / среднюю водонасыщенность можно определить по точке пересечения касательной с прямой fw =1.
Имя Уилджа (Уэлджа?) у меня просто не влезло в заголовок. Но надо сказать, что я такого имени в русских текстах не нашла.
Описание метода опубликовано в статье:
Welge, H. J. (1952) A simplified method for computing oil recovery by gas or water drive. Trans. AIME 195, 97-108.
Я нашла ее в нижеследующих статьях (см.).
Вот еще некоторые термины:
fw - fractional flow of water = поток водной фазы
Sw - water saturation = водонасыщенность
Понятно, что речь идет о графике, где на осях отложены эти переменные.
Схема Баклея-Леверетта, которая в нижеследующих статьях неоднократно поминается - модель двухфазной плановой фильтрации.
ССЫЛКИ:
Flow Instabilities During Injection of CO into Saline Aquifers
... The point of tangency defines the gas saturation at the displacement front
and the slope of the Welge tangent gives the speed of the shock. ...
http://esd.lbl.gov/TOUGHsymposium/pdfs/GarciaPruess.pdf
GEOE 412.3 RESERVOIR MECHANICS
Thickness averaging allows the Buckley-Leverett equation and the Welge tangent method to be applied to segregated flow. ...
http://www.engr.usask.ca/classes/GEOE/412/notes/412wk07.doc
Solutions to Final exam, 1997.
... 1100 x 250 x 35 x 0.21 /5.615. = 360,000 bbl. From the Welge tangent drawn from (Sw = 0.2, fw = 0), the average water saturation, (Sw)avg = 0.565. ...
http://www.ench.ucalgary.ca/~enpe525/ Exams/Finals/Final-97_sol.doc
FACULTY OF ENGINEERING
(9 Marks). Solution: (a) From the Welge tangent construction, average
water saturation at breakthrough = 0.595. fw at WOR = 20 is given by. ...
http://www.ench.ucalgary.ca/~enpe525/Exams/ Midterms/MIDTERM_00_Solutions.doc
Microsoft PowerPoint - Sharoh - Rel Perm II FINAL .ppt
.. phase “gas” nBA-rich phase SUPRI-C Affiliates Meeting 12 5/5/2003 Recovery and
http://Pressure Data From these curves, use • Welge Tangent Construction Method ...
http://pangea.stanford.edu/PetEng/supric/affiliates2003b/ slides/Sharoh/sharoh_print.pdf
... Breakthrough. Phase i. Phase j. 0. Welge Tangent Construction Method. 6/7/03.
http://pangea.stanford.edu/PetEng/supric/affiliates2003b/sli...]
The Significance of Violated Assumptions
... This method is based on the Welge's tangent technique[ 12 ], and utilizes production and pressure drop data after breakthrough of the displacing phase. ...
http://www.petec.com/Downloads/Papers/SCA99.pdf
AEA TECHNOLOGY - COMMERCIAL IN CONFIDENCE
... displacements in the absence of gravity, secondary polymer flooding can be described using a fractional flow model and a modified Welge tangent construction [4 ...
http://www.ecltechnology.com/subsur/reports/iea00dje.pdf - Pages similaires
... Figure 5 and Figure 6 also show a comparison of the numerical and the analytic solution, the latter determined by Welge's tangent method [17].
http://www-lit.ma.tum.de/veroeff/quel/010.65013_dr.ps.gz
... S_w$)-Burdine model (9) ($\gamma=2$). The analytical solution has been obtained by a method of characteristics and a modification of Welge's tangent method; eg ...
http://www.uni-kassel.de/fb14/geohydraulik/koch/paper/1992/D...
... Using the Rankine-Hugoniot jump conditions for the propagation speed of the shock and the {\bf Welge tangent construction} (Allen, et al., 1988a) the ...
http://www.uni-kassel.de/fb14/geohydraulik/koch/paper/1992/S...
--------------------------------------------------
Note added at 2003-07-05 04:25:33 (GMT)
--------------------------------------------------
Ах ты господи. Только сейчас заметила, что заголовок \"урезался\". Там на конце надо бы добавить - в пласт.
Т.е. - нефтеотдача при закачке воды и газа в пласт.
Второе приложение тангенциального метода Уэлджа: среднее значение водонасыщенности / среднюю водонасыщенность можно определить по точке пересечения касательной с прямой fw =1.
Имя Уилджа (Уэлджа?) у меня просто не влезло в заголовок. Но надо сказать, что я такого имени в русских текстах не нашла.
Описание метода опубликовано в статье:
Welge, H. J. (1952) A simplified method for computing oil recovery by gas or water drive. Trans. AIME 195, 97-108.
Я нашла ее в нижеследующих статьях (см.).
Вот еще некоторые термины:
fw - fractional flow of water = поток водной фазы
Sw - water saturation = водонасыщенность
Понятно, что речь идет о графике, где на осях отложены эти переменные.
Схема Баклея-Леверетта, которая в нижеследующих статьях неоднократно поминается - модель двухфазной плановой фильтрации.
ССЫЛКИ:
Flow Instabilities During Injection of CO into Saline Aquifers
... The point of tangency defines the gas saturation at the displacement front
and the slope of the Welge tangent gives the speed of the shock. ...
http://esd.lbl.gov/TOUGHsymposium/pdfs/GarciaPruess.pdf
GEOE 412.3 RESERVOIR MECHANICS
Thickness averaging allows the Buckley-Leverett equation and the Welge tangent method to be applied to segregated flow. ...
http://www.engr.usask.ca/classes/GEOE/412/notes/412wk07.doc
Solutions to Final exam, 1997.
... 1100 x 250 x 35 x 0.21 /5.615. = 360,000 bbl. From the Welge tangent drawn from (Sw = 0.2, fw = 0), the average water saturation, (Sw)avg = 0.565. ...
http://www.ench.ucalgary.ca/~enpe525/ Exams/Finals/Final-97_sol.doc
FACULTY OF ENGINEERING
(9 Marks). Solution: (a) From the Welge tangent construction, average
water saturation at breakthrough = 0.595. fw at WOR = 20 is given by. ...
http://www.ench.ucalgary.ca/~enpe525/Exams/ Midterms/MIDTERM_00_Solutions.doc
Microsoft PowerPoint - Sharoh - Rel Perm II FINAL .ppt
.. phase “gas” nBA-rich phase SUPRI-C Affiliates Meeting 12 5/5/2003 Recovery and
http://Pressure Data From these curves, use • Welge Tangent Construction Method ...
http://pangea.stanford.edu/PetEng/supric/affiliates2003b/ slides/Sharoh/sharoh_print.pdf
... Breakthrough. Phase i. Phase j. 0. Welge Tangent Construction Method. 6/7/03.
http://pangea.stanford.edu/PetEng/supric/affiliates2003b/sli...]
The Significance of Violated Assumptions
... This method is based on the Welge's tangent technique[ 12 ], and utilizes production and pressure drop data after breakthrough of the displacing phase. ...
http://www.petec.com/Downloads/Papers/SCA99.pdf
AEA TECHNOLOGY - COMMERCIAL IN CONFIDENCE
... displacements in the absence of gravity, secondary polymer flooding can be described using a fractional flow model and a modified Welge tangent construction [4 ...
http://www.ecltechnology.com/subsur/reports/iea00dje.pdf - Pages similaires
... Figure 5 and Figure 6 also show a comparison of the numerical and the analytic solution, the latter determined by Welge's tangent method [17].
http://www-lit.ma.tum.de/veroeff/quel/010.65013_dr.ps.gz
... S_w$)-Burdine model (9) ($\gamma=2$). The analytical solution has been obtained by a method of characteristics and a modification of Welge's tangent method; eg ...
http://www.uni-kassel.de/fb14/geohydraulik/koch/paper/1992/D...
... Using the Rankine-Hugoniot jump conditions for the propagation speed of the shock and the {\bf Welge tangent construction} (Allen, et al., 1988a) the ...
http://www.uni-kassel.de/fb14/geohydraulik/koch/paper/1992/S...
--------------------------------------------------
Note added at 2003-07-05 04:25:33 (GMT)
--------------------------------------------------
Ах ты господи. Только сейчас заметила, что заголовок \"урезался\". Там на конце надо бы добавить - в пласт.
Т.е. - нефтеотдача при закачке воды и газа в пласт.
16 hrs
дополнительные соображения:
Я уверена, что этот метод в России не называется методом Уилджа (или Уелджа).
В те годы (1952 !) иноземных журналов в России не читали.
Скорее всего этот метод (если он известен) никак не называется, или же называется что-нибудь вроде того, что я написала выше - тангенциальный метод, или "метод определения по углу наклона касательной".
В-общем, суть-то поняина из вышеприведенных ссылок, и метод действительно простой, графический.
Но как назвать - неясно.
Советую в переводже написать все-таки - тангенциальный метод Уилджа и сделать подстрочное примечание с разхяснениями и со ссылкойц на публикацию 1952 г - см. выше. Тогда будет понятно.
А вообще-то ссылок на методы расчета нефтеотдачи при закачках в пласт - очень много, вот например здесь можете посмотреть хорошие примеры по схеме Баклея Леверетта:
http://www.jscc.ru/cgi-bin/show.cgi?path=/projects/imamod01....
Но что-то нигде про этот тангенс не могу найти...
В те годы (1952 !) иноземных журналов в России не читали.
Скорее всего этот метод (если он известен) никак не называется, или же называется что-нибудь вроде того, что я написала выше - тангенциальный метод, или "метод определения по углу наклона касательной".
В-общем, суть-то поняина из вышеприведенных ссылок, и метод действительно простой, графический.
Но как назвать - неясно.
Советую в переводже написать все-таки - тангенциальный метод Уилджа и сделать подстрочное примечание с разхяснениями и со ссылкойц на публикацию 1952 г - см. выше. Тогда будет понятно.
А вообще-то ссылок на методы расчета нефтеотдачи при закачках в пласт - очень много, вот например здесь можете посмотреть хорошие примеры по схеме Баклея Леверетта:
http://www.jscc.ru/cgi-bin/show.cgi?path=/projects/imamod01....
Но что-то нигде про этот тангенс не могу найти...
Something went wrong...