Glossary entry (derived from question below)
English term or phrase:
SDR 35 pipe
French translation:
tuyau PVC SDR 35
Added to glossary by
Daniel Bouchard
Jun 9, 2011 20:58
13 yrs ago
English term
SDR 35 pipe
English to French
Tech/Engineering
Engineering (general)
"4” outlet cap with 4” SDR 35 pipe"
For a trench drain system for use around residential, office, and other light duty areas.
Thanks for the help!
For a trench drain system for use around residential, office, and other light duty areas.
Thanks for the help!
Proposed translations
(French)
| 4 +1 | tuyau PVC SDR 35 |
FX Fraipont (X)
|
Proposed translations
+1
9 mins
Selected
tuyau PVC SDR 35
"TUYAUX D'ÉGOUT EN PVC DURALOCMD
Spécifications abrégées. Les tuyaux d'égout DURALOC SDR 35 et SDR 28 sont fabriqués à partir de composés en PVC avec une classification cellulaire 12454-B ..."
http://na.rehau.com/files/Duraloc_Data_Sheet_F_07.07.pdf
--------------------------------------------------
Note added at 10 mins (2011-06-09 21:09:21 GMT)
--------------------------------------------------
"Standard Dimension Ratio - SDR
It is common to use the "Standard Dimension Ratio" - SDR - as method of rating pressure piping
Many PE pipe manufacturers use the "Standard Dimension Ratio" - SDR - method of rating pressure piping. The SDR is the ratio of pipe diameter to wall thickness and the SDR can be expressed as ..."
http://www.engineeringtoolbox.com/sdr-standard-dimension-rat...
Spécifications abrégées. Les tuyaux d'égout DURALOC SDR 35 et SDR 28 sont fabriqués à partir de composés en PVC avec une classification cellulaire 12454-B ..."
http://na.rehau.com/files/Duraloc_Data_Sheet_F_07.07.pdf
--------------------------------------------------
Note added at 10 mins (2011-06-09 21:09:21 GMT)
--------------------------------------------------
"Standard Dimension Ratio - SDR
It is common to use the "Standard Dimension Ratio" - SDR - as method of rating pressure piping
Many PE pipe manufacturers use the "Standard Dimension Ratio" - SDR - method of rating pressure piping. The SDR is the ratio of pipe diameter to wall thickness and the SDR can be expressed as ..."
http://www.engineeringtoolbox.com/sdr-standard-dimension-rat...
4 KudoZ points awarded for this answer.
Comment: "Merci!"
Something went wrong...