Glossary entry (derived from question below)
English term or phrase:
form-wound
Indonesian translation:
lilitan-teratur
Added to glossary by
Hipyan Nopri
Oct 29, 2007 05:12
16 yrs ago
3 viewers *
English term
form-wound
English to Indonesian
Tech/Engineering
Electronics / Elect Eng
Electrical Machinery
IEEE 275-1992, "Recommended Practice for Thermal Evaluation of Insulation Systems for Alternating-Current Electric Machinery Employing Form-Wound Preinsulated Stator Cable for Machines Rated 6900 V and Below."
Terima kasih sebelumnya atas bantuannya.
Terima kasih sebelumnya atas bantuannya.
Proposed translations
(Indonesian)
5 +1 | lilitan-teratur | ivo abdman |
3 | berbentuk ulir | Hikmat Gumilar |
Proposed translations
+1
3 hrs
Selected
lilitan-teratur
Secara lengkap dapat dikatakan "dililit dengan teratur (rapih/per lapis/tidak serampangan)"
Form-wound selalu dibandingkan dengan Random winding
definisi
http://www.answers.com/topic/form-wound-coil?cat=technology
form-wound coil (′förm ¦wau̇nd ′köil)
(electricity) Armature coil that is formed or shaped over a fixture before being placed on the armature of a motor or generator.
dan
definisi
http://www.answers.com/random+winding?cat=technology
random winding (′ran·dəm ′wīnd·iŋ)
(electricity) A coil winding in which the turns are positioned haphazardly rather than in layers.
Sekedar Informasi tambahan yang belum bisa dijadikan patokan karena hanya jawaban dari seseorang yang belum tentu kebenarannya
petronila (Electrical) 23 Dec 05 15:53
Hello Cvirgil,
Form Wound Coil is a coil made with SQUARE or RECTANGULAR wire.
Random Coils is a coil made with ROUND wire.
The main difference with this two winding types is the wire type.
In form windings you most insulate all coil wrapping mica and glass tape arround all coils and for large machines you could change a part of the winding in some failure cases, in random windings you insulate the slots and place insulation between each end coil.
I would prefer the form wound coils due to this winding will last more time in operation and for design point you can use high volt/turn ratio, also the mechanicall stress due to magnetical forces is avoided due to the coils will fit OK on the slot.
Regards,
petronila
Form-wound selalu dibandingkan dengan Random winding
definisi
http://www.answers.com/topic/form-wound-coil?cat=technology
form-wound coil (′förm ¦wau̇nd ′köil)
(electricity) Armature coil that is formed or shaped over a fixture before being placed on the armature of a motor or generator.
dan
definisi
http://www.answers.com/random+winding?cat=technology
random winding (′ran·dəm ′wīnd·iŋ)
(electricity) A coil winding in which the turns are positioned haphazardly rather than in layers.
Sekedar Informasi tambahan yang belum bisa dijadikan patokan karena hanya jawaban dari seseorang yang belum tentu kebenarannya
petronila (Electrical) 23 Dec 05 15:53
Hello Cvirgil,
Form Wound Coil is a coil made with SQUARE or RECTANGULAR wire.
Random Coils is a coil made with ROUND wire.
The main difference with this two winding types is the wire type.
In form windings you most insulate all coil wrapping mica and glass tape arround all coils and for large machines you could change a part of the winding in some failure cases, in random windings you insulate the slots and place insulation between each end coil.
I would prefer the form wound coils due to this winding will last more time in operation and for design point you can use high volt/turn ratio, also the mechanicall stress due to magnetical forces is avoided due to the coils will fit OK on the slot.
Regards,
petronila
4 KudoZ points awarded for this answer.
Comment: "Terima kasih, Ivo dan Hikmat atas masukannya yang sangat berharga. "
8 hrs
berbentuk ulir
Kabel Stator Prapenyekatan Berbentuk Ulir
Peer comment(s):
neutral |
ivo abdman
: saya temukan juga form dikamus teknik bisa bermakna profil, atau dikamus merriam webster profil ulir
14 hrs
|
Something went wrong...